For more information editing

Quick-drying performance: improve speed, more shorten the drying time hot start, about 5 to 9 seconds, to achieve quick-drying, greatly reducing operating costs
Lightweight design: lightweight, easy construction, compared with the original model, the volume reduction of 12%, by weight of 16%!
Cool hot air can switch: Depending on the season, automatic hand dryer can be adjusted, due to the different seasons, can be switched cool \ hot air,
Antibacterial treatment: intake air filter by super anti-allergic purification, more environmental health, easy to clean, use antibacterial resin material, easier to clean.
Installation mode: Wall Mount
Cool hot air can switch: Depending on the season, commercial hand dryers can be adjusted, due to the different seasons, can be switched cool \ hot air, reduce annual operating costs

Start-up mode

Start-up mode, usually induction manual, IR two ways, Stainless Steel Hand Dryer now the new way to start the photoelectric type, characterized by fast start, not susceptible to environmental influences, such as infrared light may lead to dry hands kept turning, or start their own, photoelectric using the amount of light blocked the way to start, thereby preventing an infrared hand dryers problem, jet dryer the same does not touch the dry hands to prevent cross-infection

Dihour auto hand dryers

automatic hand dryer are among a bathroom with dry hands or dry hands sanitary appliances, automatic induction into stem cell phones and hand dryers. It overcomes the existing dry hands no more direction of the wind tends to hand skin temperature drawback, aims to provide a multi-directional wind cycle to dry hands, use a hand dryer in the outlet is located a wind deflector, there is wind on page piece wind deflector, turn the page or sheet of wind through wind deflector swing to auto hand dryers circulation is not directed a technical solution of the wind

Heating device

Have a heating device heating device, PTC, electric wire.
1, no heating means, by definition there is no heating means
Apply more stringent requirements for the temperature of the place, jet hand dryer place frequently used mobile phones,
For example: Frozen vegetables, frozen dumplings packaging workshop
2, PTC heating
PTC thermistor heating, because as the ambient temperature changes, PTC heating power also changes, winter PTC heating power increases, dryers blow warm air temperature increases, energy saving and environmental protection.
PTC is characterized by a constant temperature is good, but there are some shortcomings,hand dryer is no electric wire temperature up fast

Electric wire heating

Traditional electric wire heating, air temperature rises rapidly, but poor air temperature constant, easy air temperature is high, the opponent has burns.
High Speed Hand Dryers use an electric wire CPU with the temperature sensor in a controlled manner to achieve fast and constant air temperature rise effect, even winds of up to 100 m / s, when stem cell phones also can blow a constant temperature and the wind.Usually supplemented by wind-based heating stem cell phones of the noise is relatively large, Dihour and smaller hot air to heat-based mobile phone noise, companies can choose according to their actual situation

Works Edit

1. Microcomputer infrared automatic soap dispenser machine, using sophisticated integrated circuit technology, an open fluid interface, using intelligent infrared sensing device, avoid hand contact, to prevent cross-infection, with 4 × 1.5V batteries, for a variety of soap ,detergent.
2. Can the human hand is automatically received signal to open the switch to soap, which work the discharge of soap or foam. Automatic time set the time and casual work in two modes. Currently many touchless soap dispenser wall mounted are used to set the timing supply in the form of soap or foam. That time you reach out and soap or bubble, soap receives automatic signal, and let the machine work, but the machine's work provisions, at this set time the machine will automatically stop functioning